Which box sealer is better?

The sealing machine can automatically perform carton sealing operations, saving a lot of manpower, material resources and time for enterprises. In recent years, more and more merchants have begun to use sealing machine products. However, although there are many types of sealing machines on the market, which one is better for use? The following editor of the packaging machine manufacturer will share some common sense for purchasing:

The usage status of the sealing machine can be roughly divided into three types: one-shaped, I-shaped sealing, and fully automatic. Each type of sealing effect is different. It is not common to use stand-alone machines. When packaging, most boxes need to be packaged in the upper, lower and bottom. It is not particularly convenient to use. When the box sealer uses a one-shaped box seal, it forms an I-shaped box seal. The packaging effect is relatively good compared to a single box seal. Most of them are used in large enterprises. Fully automatic box sealer is a very popular box sealing method at present. It can directly encapsulate the bottom of the carton. This method of packing increases the strength of the carton and saves a lot of time and manpower. Compared with the first two sealing methods, it has more advantages, so when we perform sealing operations, using the latter method will save more time and effort.

To choose a sealer with suitable and good results, these aspects need to be considered:

1. Compressed air quality of the sealer

The compressed air produced by ordinary sealers contains a certain amount of smooth oil and a certain amount of water. Some places are banned from oil and water. At this time, not only should you pay attention to the selection of the sealer, but you should add additional installations if necessary.

2. Places and conditions

If the use site is small (for marine and automotive), vertical type should be selected; if the use site has a long interval change (more than 500 meters), mobile type should be considered; if the use site cannot supply power, diesel engine-driven type should be selected; if there is no tap water in the use site, air-cooled type must be selected.