Do you know how to use the baler

How to use a baler? A baler, also known as a baler, a belt-beating machine or a bundling machine, is to tie products or packaging with bundling tapes, and then fasten and bond both ends through heating and hot melt bonding. The function of the baler is to strengthen the packaged goods so that the goods will not be dispersed and stored due to weak bonding during the handling process, and must also be tied neatly and beautifully. Before using it, we should know how it works.

How to use a baler? The baler manufacturer has introduced several common methods of using a packer.

The packaging object is basically in the middle of the packer. First, lift your right shoulder and press the front of the belt to tighten and tie it to the object. Then the left shoulder body rises, press the appropriate position of the lower belt, and the heating plate reaches the middle of the two belts. A baler is a machine that uses a packaging tape to wrap a product or packaging, then tightens and melts the ends through thermal effects, or connects with materials such as snaps. The function of the baler is to make the plastic tape close to the bundled packaging surface.

1. Automatic baler: There is no need to manually insert the belt. The triggering methods include moving, manual, continuous play, ball switch, and foot switch. You just need to press the switch to automatically complete the packaging, which is convenient and fast.

2. Semi-automatic baler: After manually inserting the baler into the baler, the machine will automatically complete the packaging process of tape collection, bonding, cutting and peeling. Because every product requires manual operation.

3. Fully automatic unmanned packaging machine: There is no need to manually insert the belt, just set it: Automatically complete the entire process of belt bundling, bonding, cutting and belt out. 1-5 bundles can be customized according to needs, speed: 2.0 seconds/channel.

4. Manual baler: manual operation is required to complete the entire process. Generally speaking, there are methods of electric heat melting and iron buckle clamping.

Precautions for using the baler

1. Please confirm the power supply used by the machine. Do not plug in the wrong power supply. The machine adopts a three-phase and four-wire system, and the flower wire is a grounding neutral wire to protect the leakage.

2. During operation, do not use your head and hands to cross the track of the conveyor belt.

3. Please do not touch the heating plate directly with your hands.

4. Do not clean the machine with water. When the workplace is wet, operators are not allowed to work barefoot.

5. When the machine is not in use, please roll the tape in the storage bin back to the tape tray to avoid deformation during the next use.

6. Do not stick oil to the surface of the conveyor.

7. Remember to unplug the power when the machine is not in use.

8. Do not replace parts on the machine at will.

9. Main components should be lubricated frequently with oil.