Brief analysis on how to handle cutting tape by cutting the box sealing machine

Case sealing machines are very common in our lives now. They can seal quickly and have a beautiful appearance. Cutting tape with a box sealing machine cutter is an indispensable process in the sealing process, but during use, continuous cutting tape may occur. What is the reason and how to deal with it? In response to this problem, the following editor of the box sealing machine manufacturer will introduce it in detail.

1. The cutting knife needs to be cleaned.

There are two important components in the movement of the box sealer, one is the brush and the other is the blade. These two small things cannot be ignored because the tape is closely related to them. The brush is responsible for correcting the transmission position of the tape, and the knife is responsible for cutting the tape, which is usually carried out in a serrated manner.

After long-term use of the box sealing knife, a large amount of tape residue will be attached to the surface. If this residue is not cleaned regularly, the sealer's knife will become less sharp over time, constantly cutting the tape.

2. The pressure of exercise is not high enough.

The movement pressure mentioned here is not the movement spring pressure we mentioned earlier, but the up and down movement pressure. A direct manifestation of insufficient strength is that the carton cannot be passed, but sometimes the carton cannot be cut off the tape. Then it may be necessary to adjust the movement pressure so that the tape is fully contacted with the tool and cut the tape naturally.

The cutting principle of the box sealer depends on the pressure of the carton during the driving process, and then completed with a knife. When the movement spring is loose, the pressure will become smaller, and the tape will not be easily cut off after the tension becomes smaller. The user can adjust the screws of the moving spring to adapt to the tightness of the box sealer. If adjusted to a larger value, it needs to be replaced.

3. The movement spring is loose.

The next is the exercise part. A good box sealer has a lot to do with sports. Exercise is related to the success of tape cutting. The tape is tough and the tape is not easy to be cut with a knife. Only good exercise can cut neatly.

The cutting principle of the box sealer depends on the pressure of the carton during the driving process, and then completed with a knife. When the movement spring is loose, the pressure will become smaller, and the tape will not be easily cut off after the tension becomes smaller. The user can adjust the screws of the moving spring to accommodate the tightness of the sealer. If adjusted to a larger value, it needs to be replaced.

4. Adjust the position of the knife.

A user who is familiar with box sealing machines knows that the fixed part of the box sealing machine knife is a long hole, which can be displaced in the long hole, which is appropriately too high, and can also make the knife belt more perfect.

The above is the reason for the uneven cutting of the tape of the automatic box sealer. The automatic sealer packs fast, exceeding the worker's packaging. It can pack various packaging in a short time, which plays an important role in improving packaging efficiency.