Do you know the solution to automatic box sealing machine card box

Automatic box sealing machines play a great role in packaging machinery. Do you know what to do when the automatic box sealing machine card box is?

1. The width or height adjustment is too small. The automatic box sealer manually adjusts the corresponding width and height when transporting the carton, which occasionally causes the carton situation. The best way to solve this problem is to place the carton on the working surface of the automatic box sealer and then make adjustments.

2. The carton is too light to pass through the movement. The principle of automatic box sealing tape is that the carton touches the guide roller during the conveying process, thereby sealing the tape on the carton. But in this process, if the carton is too light and the guide roller cannot move, it will get stuck.

3. The tape was not cut off. After the automatic box sealer is used for a period of time, there will be a lot of tape chips and dust on the knife, which will cause the knife to be not sharp and continuously cut the tape. Continuous cutting of the tape will cause the carton to be stuck in the box sealer and cannot be transported. The solution to this problem is to clean the tool or replace it.

The above is the relevant information compiled by the baler manufacturer for everyone, I hope it will be helpful to you.