A brief analysis of what to do if the carton jams occur in the box sealer

The machine often has various common problems during work. For the box sealer, jamming of the carton is one of the common faults. The following editor of the box sealer manufacturer will introduce the causes and solutions to this problem:

1. The tape wheel adjustment nut is too tight. The tape wheel is mainly a fixed tape roll. During the process of the carton traveling, the tape roll rotates accordingly, thereby achieving sealing the box. However, if the tape roll cannot rotate, the box will naturally occur. At this time, just loosen the tape wheel adjustment nut. 

2. Unreasonable adjustment of box height. This unreasonableness is mainly manifested in the fact that the height adjustment is too low, and the extension presses tightly to hold the carton tightly and cannot be conveyed. At this time, we can push the carton with our hands. If it cannot be pushed, just adjust the height higher.

3. The active spring is too tight. Release the main spring.

4. The carton product is too light. The carton enters the box sealing machine equipment and cannot pass the tape wheel of the box sealing machine machinery to cause the box to be stuck.

The above is the relevant information compiled by the box sealing machine manufacturer for everyone, I hope it will be helpful to you.