What common faults will occur during use of the box sealer?

The box sealer is a machine used for automatic packaging and box sealing. What are the common faults? Let’s take a look with the box sealing machine manufacturer below!

1. The sealing is not firm: This is one of the common problems. If the pressure of the sealing machine is insufficient or the sealing belt is loose during sealing, it will cause the sealing to be unsolid, which can easily lead to scattering of packaging materials or damage to the product.

2. Case sealing failure: Sometimes the sealing machine will fail to seal the packaging during operation, resulting in the sealing belt failing to successfully seal the packaging. This may be caused by insufficient tension, insufficient pressure, or stuck in the sealing belt.

3. Fault code display: During the operation of the box sealing machine, the display of the fault code sometimes occurs, which may be caused by internal sensor failures, circuit board failures, or other electrical problems of the machine. It needs to be checked and repaired in time before it can continue to be used.

4. Slow sealing speed: Sometimes the running speed of the sealing machine will slow down, especially after a long period of use. This may be caused by wear, insufficient lubrication or transmission system failure in the internal parts of the machine.

5. Case sealing belt jam: During the use of the sealing machine, the sealing belt will sometimes be stuck or broken, resulting in the sealing failure. This may be caused by damage to the sealing belt, accumulation of dust, loose rope wheels, etc.

For the above common faults, users should regularly inspect and maintain the sealing machine to ensure the normal operation of the equipment and repair the faults in a timely manner. At the same time, when using the box sealer, you must follow the correct operating procedures to avoid failures caused by improper human operation. Only in this way can the normal operation of the box sealing machine be ensured, production efficiency and product quality can be improved.